Swiftech MCR140-X - CPU Liquid Cooling Systems CPU Cooler VGA Water Block Heatsink Pump Radiator Heat Exchanger Kit

MCR140-X Drive

Price: $89.95

Out of stock

Part Number: MCR140-X

Bulk shipping information: 9 Pcs/Ctn

Patent: U.S. Patents No. 9,927,181 & 10,048,008

Bulk Shipping Information: 9 Pcs/Ctn

Add to a new shopping list

Email this page to a friend

Product Description

The patent pending MCR140-X Drive 140mm copper and brass radiator includes a built-in windowed illuminated reservoir, and an integrated high pressure pump (MCP30 model).

Applications for this product are multiple:

As a standalone item, the MCR140-X Drive is a perfect DIY solution for users who already own an all-in-one CPU cooler, and simply wish to install a secondary cooling system for one or several liquid cooled graphics cards without tearing down their existing cooling system.

the MCR140-X can also be used as the foundation for a CPU cooling system in space constrained applications by simply adding a CPU waterblock and relevant accessories,

or it can be used as a secondary pump/radiator/reservoir combo in complex systems requiring two pumps in series.

As a DIY item, the MCR140-X ships without fan, coolant, or fittings. The product is compatible out of the box with all G1/4 fittings, so any tubing can be installed at the user's choice.

What you need to build a graphics or CPU cooling system using the MCR140-X Drive as foundation:

A waterblock for your graphics card or your CPU

A 140mm fan

Tubing of your choice

2 pairs of G1/4 fittings for the tubing size that you want to use, with clamps if using barb fittings, or without clamps if using compression fittings

Coolant

The MCR140-X carries Swiftech limited 3 year warranty.

Specifications
Support
In the News

Tab 1

Specifications
Radiator Material	Brass tubes, louvered copper fins, 12~14 FPI
Dimensions	150mm x 140mm x 90mm
Radiator and pump thread class	G 1/4
Radiator Installation hardware	Standard: (4) 6-32 x 1 3/16 (30mm) Philips screws
Pump speed control	PWM
Pump Speed range	1200 ~ 3000 RPM
Pump nominal voltage	12 VDC
Pump nominal power	6W
Pump Bearing type	Ceramic shaft, PTFE bearing
Pump Power connector	SATA
Pump RPM & PWM connector	Mini 4-pin
Pump MTBF	60,000 hours
ROHS	Compliant

Tab 2

Quick Installation Guide (pdf)

PWM Troubleshooting
"All the devices connected to my PWM splitter work at 100% but I cannot vary their speed" Check that the splitter mini-4 pin PWM signal cable is correctly connected to the CPU_Fan connector of the motherboard Enable "Manual Fan Control" in the motherboard BIOS *"The device(s) connected to my PWM splitter do not work"* Check that the splitter power cable is connected to the power supply Check that the non-functioning device female 4-pin connector is correctly inserted in all 4 pins of the splitter connector: in effect, it may be possible to inadvertently offset the female connector by one pin by slightly forcing its insertion, so be careful about this! *"I am getting a "CPU fan error" when I turn on the computer"* Make sure that a device is connected to channel 1 of the PWM splitter. If the motherboard CPU_Fan header does not read an RPM signal, it will return such error by default. Check that the device connected to Channel 1 of the PWM splitter is correctly inserted in its connector. Check that the power cable of the PWM splitter is connected to power supply. *"I connected the PWM splitter to an auxiliary 4-pin connector that was indicated as PWM capable by my Motherboard manual, but I can't vary the speed of my devices"* Other than the CPU_Fan connector which is PWM enabled by default, most of the motherboards 4-pin connectors feature two methods of speed adjustment in order to allow control of both types of fans, the 3-pins which are voltage controlled, and the 4-pins which are PWM controlled. As a result, the PWM functionality must be enabled in the BIOS before it can actually work. Please consult your motherboard manual for a "how To". Since the "CPU_Fan" motherboard connector is PWM enabled by default, we recommend that you connect the splitter to the CPU_Fan connector in order to ascertain its functionality. "I am connecting the splitter to a PWM fan controller instead of the motherboard, and it doesn't work" Not all PWM fan controllers are compatible. Please read this white paper for further explanations and a list of compatible devices.